Price: £2,995 (exc. VAT)
Code: CL120241
This classroom loft is free standing and sits in the corner of a classroom. The ground floor and first floor levels both provide good play spaces for the children. The ground floor area has a large open doorway and low level panels all the way around and a small 'hide a way' area under the stairs. The 1st floor is reached via the staircase on the left hand side and is protected with 3ft balustrade rails. Soft floor tiles are fitted on the stairs and the first floor.
8ft 6in (260cm) wide
7ft 9in (240cm) deep
Platform height: 4ft 3in (1300mm)
Clearance height: 3ft 10in (1185mm)
Safety is built into our products at all stages. We have had all our standard products checked over by ROSPA and worked with them to ensure that all aspects of EN1176-1 playground regulations are fully taken into account in the design and construction.
All the timber used is excellent quality redwood with rounded edges finished with a clear varnish that is smooth and washable to ensure that there are no catch points or sharp edges.
The Classic range of Classroom Lofts can be installed by you relatively easily. It will need two people as the panels can be heavy but the packs come with all the necessary fixing instructions and a full set of installation instructions. Bespoke products would always be installed by us and, for a small additional charge, we are always very happy to install any of the Classic range to give you complete peace of mind.
Your Classroom Loft is designed to take the minimum of maintenance. The materials used are of the highest quality to ensure that children’s play and development keeps going into the future. The Loft is finished in a wipeable satin varnish and so any unwanted markings can easily be cleaned. You can fix hooks and other fixings into it but beware that they will leave a mark when removed. In the unlikely event of a major dent or scratch, as the product is solid timber it can easily be sanded out and then revarnished.
Our classroom lofts are made from high quality materails and to EN1176-1 playground regulations. The frame is 100mm x 50mm redwood (from renewable forests) and the insert panels are 15mm birch plywood. The floor and stairs are 15mm plywood with a 14mm thick soft floor fitted over the top. The balustrade rails are made from 38mm x 50mm redwood (from renewable forests) fully rounded and sanded to give a smooth edge and are 750mm high.
All walls and balustrade rails are finished off with two coats of clear varnish.
Email Us
Call us 01544 387103
