Price: £3,968 (exc. VAT)
This classroom loft sits nicely along an existing wall. There is access to the ground floor area at the front and to the right hand side under the staircase. The loft has a single 1st floor accessed via a staircase to the right hand side. The left hand side has an open panel and the back panel is solid.
Size: 10ft (305cm) wide x 5ft (152cm) deep plus an additional 1ft for the staircase.
Platform height: 4ft (122cm)
Safety is built into our products at all stages. We have had all our standard products checked over by ROSPA and worked with them to ensure that all aspects of EN1176-1 playground regulations are fully taken into account in the design and construction.
All the timber used is excellent quality redwood with rounded edges finished with a clear varnish that is smooth and washable to ensure that there are no catch points or sharp edges.
The Classic range of Classroom Lofts can be installed by you relatively easily. It will need two people as the panels can be heavy but the packs come with all the necessary fixing instructions and a full set of installation instructions. Bespoke products would always be installed by us and, for a small additional charge, we are always very happy to install any of the Classic range to give you complete peace of mind.
Your Classroom Loft is designed to take the minimum of maintenance. The materials used are of the highest quality to ensure that children’s play and development keeps going into the future. The Loft is finished in a wipeable satin varnish and so any unwanted markings can easily be cleaned. You can fix hooks and other fixings into it but beware that they will leave a mark when removed. In the unlikely event of a major dent or scratch, as the product is solid timber it can easily be sanded out and then revarnished.
Our classroom lofts are made from high quality materails and to EN1176-1 playground regulations. The frame is 100mm x 50mm redwood (from renewable forests) and the insert panels are 15mm birch plywood. The floor and stairs are 15mm plywood with a 14mm thick soft floor fitted over the top. The balustrade rails are made from 38mm x 50mm redwood (from renewable forests) fully rounded and sanded to give a smooth edge and are 750mm high.
All walls and balustrade rails are finished off with two coats of clear varnish.
These optional accessories can by included with your loft to add interactive features for the children, or simply extra character to the design.